Codul SA/NC 72082298 este în afara domeniului de aplicare pentru pregătirea EUDR.
Flat-rolled products in coils, simply hot-rolled, of iron or non-alloy steel (excl. high resistance), of a thickness > 4,75 mm but <= 10 mm, of a width >= 600 mm (excl. 7208.22.10 to 7208.22.95) Motorul de domeniu indexat returnează Out of scope pentru acest cod. No Annex I scope match was found for this indexed CN code.
De ce această pagină de referință dă acest răspuns.
- Descrierea codului
- Flat-rolled products in coils, simply hot-rolled, of iron or non-alloy steel (excl. high resistance), of a thickness > 4,75 mm but <= 10 mm, of a width >= 600 mm (excl. 7208.22.10 to 7208.22.95)
- Temei în anexa I
- Fără intrare directă în anexa I
- Temeiul sursei
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Rânduri părinte, copil și învecinate.
Vizualizarea de bibliotecă este pentru navigare de referință. Folosiți verificatorul atunci când doriți să rulați un alt cod ca acțiune.
72fontă, fier și oțelout7208flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedout720822flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 4,75 mm and <= 10 mm and having a minimum yield point of < 355 mpaout72082210flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm and having a maximum yield point of < 355 mpa, intended for re-rolling "ecsc"out72082291flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm and having a maximum yield point of < 355 mpa, with patterns in relief directly due to the rolling process "ecsc" (excl. products intended for re-rolling)out72082295flat-rolled products in coils, simply hot-rolled, of iron or non-alloy steel (excl. high resistance), of a thickness >= 4,75 mm but <= 10 mm, of a width >= 600 mm, pickled (excl. 7208.22.10 and 7208.22.91)out72082299flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4.75 mm but =< 10 mm and having a maximum yield point of < 355 mpa, without patterns in relief 'ecsc' (excl. products intended for re-rolling)out
Ce înseamnă acest lucru pentru pregătire.
Acest rând nu declanșează direct colectarea de dovezi în rezultatul actual al domeniului.
Regulation (EU) 2023/1115 Annex I — relevant productspreluat la 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115preluat la 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)preluat la 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)preluat la 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8preluat la 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingpreluat la 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderspreluat la 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)preluat la 2026-08-08