Kód HS/CN 72083210 je pre prípravu EUDR mimo rozsahu pôsobnosti.
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm and having a minimum yield point of 355 MPa, with patterns in relief directly due to the rolling process "ECSC" Indexovaný motor rozsahu pôsobnosti vracia pre tento kód Out of scope. No Annex I scope match was found for this indexed CN code.
Prečo táto referenčná stránka dáva takúto odpoveď.
- Popis kódu
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm and having a minimum yield point of 355 MPa, with patterns in relief directly due to the rolling process "ECSC"
- Základ v Prílohe I
- Žiadna priama položka v Prílohe I
- Základ zdroja
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Nadradené, podradené a susedné riadky.
Zobrazenie knižnice slúži na referenčnú navigáciu. Ak chcete spustiť ďalší kód ako akciu, použite nástroj na kontrolu.
72iron and steelout7208flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedout720832flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness > 10 mm and having a minimum yield point of 355 mpa "ecsc" (excl. wide flat "universal plate")out72083230flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm and having a minimum yield point of 355 mpa, with patterns in relief directly due to the rolling process "ecsc" (excl. wide flats, also known as "universal plate")out72083251flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 mpa, with patterns in relief directly due to the rolling process "ecsc" (excl. wide flats, also known as "universal plate")out72083259flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72083291flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72083299flat-rolled products of iron or non-alloy steel, of a width of < 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out
Čo to znamená pre prípravu.
Tento riadok nie je v aktuálnom výsledku rozsahu pôsobnosti priamym spúšťačom zhromažďovania dokladov.
Regulation (EU) 2023/1115 Annex I — relevant productszískané 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115získané 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)získané 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)získané 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8získané 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingzískané 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderszískané 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)získané 2026-08-08