Kód HS/CN 72083251 je pre prípravu EUDR mimo rozsahu pôsobnosti.
Flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 MPa, with patterns in relief directly due to the rolling process "ECSC" (excl. wide flats, also known as "universal plate") Indexovaný motor rozsahu pôsobnosti vracia pre tento kód Out of scope. No Annex I scope match was found for this indexed CN code.
Prečo táto referenčná stránka dáva takúto odpoveď.
- Popis kódu
- Flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 MPa, with patterns in relief directly due to the rolling process "ECSC" (excl. wide flats, also known as "universal plate")
- Základ v Prílohe I
- Žiadna priama položka v Prílohe I
- Základ zdroja
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Nadradené, podradené a susedné riadky.
Zobrazenie knižnice slúži na referenčnú navigáciu. Ak chcete spustiť ďalší kód ako akciu, použite nástroj na kontrolu.
72iron and steelout7208flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedout720832flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness > 10 mm and having a minimum yield point of 355 mpa "ecsc" (excl. wide flat "universal plate")out72083210flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm and having a minimum yield point of 355 mpa, with patterns in relief directly due to the rolling process "ecsc"out72083230flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm and having a minimum yield point of 355 mpa, with patterns in relief directly due to the rolling process "ecsc" (excl. wide flats, also known as "universal plate")out72083259flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72083291flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72083299flat-rolled products of iron or non-alloy steel, of a width of < 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out
Čo to znamená pre prípravu.
Tento riadok nie je v aktuálnom výsledku rozsahu pôsobnosti priamym spúšťačom zhromažďovania dokladov.
Regulation (EU) 2023/1115 Annex I — relevant productszískané 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115získané 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)získané 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)získané 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8získané 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingzískané 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderszískané 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)získané 2026-08-08