HS/KN-kod 721499 är utanför tillämpningsområdet för EUDR-förberedelse.
Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular {other than square} cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel) Den indexerade omfattningsmotorn returnerar Out of scope för denna kod. No Annex I scope match was found for this indexed CN code.
Varför denna referenssida ger det svaret.
- Kodbeskrivning
- Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular {other than square} cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel)
- Grund i bilaga I
- Ingen direkt post i bilaga I
- Källgrund
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Överordnade, underordnade och närliggande rader.
Biblioteksvyn är till för referensnavigering. Använd kontrollen när du vill köra en annan kod som en åtgärd.
72järn och stålout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out72149910bars and rods of the type used for concrete reinforcement, smooth, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing < 0,25% of carbon, of square cross-section or of a cross-section other than rectangularout72149931bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72149939bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72149950bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72149961bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring >= 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel)out72149969bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring < 80 mm in diameter (excl. with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel)out72149971bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% carbon, of circular cross-section measuring >= 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel)out72149979bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% carbon, of circular cross-section measuring < 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel)out72149980bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of square or of other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel)out72149990bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,6% of carbon (excl. with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel)out721410bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils)out721420bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling processout721430bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling)out721440other bars and rods of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721450other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721460other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out
Vad detta betyder för förberedelsen.
Denna rad utlöser inte direkt bevisinsamling i det aktuella omfattningsresultatet.
Regulation (EU) 2023/1115 Annex I — relevant productshämtad 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hämtad 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hämtad 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hämtad 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hämtad 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghämtad 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershämtad 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hämtad 2026-08-08